Frymaster GEN II LOVTM BIELA14 Operator's Manual page 3

Improper installation, adjustment, maintenance or service, and unauthorized alterations or
modifications can cause property damage, injury, or death. Read the installation, operating,
and service instructions thoroughly before installing or servicing this equipment.
The front ledge of this appliance is not a step!
injury can result from slips or contact with the hot oil.
Do not store or use gasoline or other flammable liquids or vapors in the vicinity of this or
any other appliance.
The crumb tray in fryers equipped with a filter system must be emptied into a fireproof
container at the end of frying operations each day. Some food particles can spontaneously
combust if left soaking in certain shortening material.
Do not bang fry baskets or other utensils on the fryer's joiner strip. The strip is present to
seal the joint between the fry vessels.
shortening will distort the strip, adversely affecting its fit. It is designed for a tight fit and
should only be removed for cleaning.
Adequate means must be provided to limit the movement of this appliance without
depending on or transmitting stress to the electrical conduit. A restraint kit is provided with
the fryer. If the restraint kit is missing contact your local KES.
This fryer has a power cord (three-phase) for each frypot and a single five-wire cord for the
entire system. Prior to movement, testing, maintenance and any repair on your Frymaster
fryer; disconnect ALL electrical power cords from the electrical power supply.
Keep all items out of drains. Closing actuators may cause damage or injury.
The instructions in this manual for using a bulk oil system for filling and discarding oil are
for an RTI system. These instructions may not be applicable to other bulk oil systems.
DANGER
DANGER
Do not stand on the appliance. Serious
DANGER
DANGER
WARNING
Banging fry baskets on the strip to dislodge
DANGER
DANGER
DANGER
NOTICE