2
Press PROG to activate program mode.
»
[PROG] blinks on the display.
3
Press / to allocate a number (1 to 20)
to this radio station, then press PROG to
confirm.
»
The preset number and the frequency
of the preset station are displayed.
4
Repeat the steps above to program other
stations.
Note
•
To overwrite a programmed station, store
another station in its place.
Select a preset radio station
1
Press / to select a preset number.
Tip
•
Position the antenna as far as possible from
TV, VCR or other radiation source.
•
For optimal reception, fully extend and adjust
the position of the antenna.
Set RDS clock
You can use time signal broadcast together with
the RDS signal to set the clock of the apparatus
automatically.
1
Tune to a RDS radio station that
transmits time signals.
»
The apparatus reads the RDS time and
sets the clock automatically.
Note
•
The accuracy of the transmitted time depends
on the RDS station that transmits the time
signal.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to a RDS station, a RDS
icon and the station name are displayed.
When automatic programming is used, RDS
stations are programmed first.
1
Tune to a RDS station.
2
Press RDS/CLOCK repeatedly to scroll
through the following information (if
available):
»
Station name
»
Program type such as
[SPORT] (sport), [POP M] (pop
music)...
»
Frequency
[NEWS] (news(,
EN
23