Listen Through Headphone; Connect Power; Get Started; Install Remote Control Batteries - Philips MCD909 User Manual

Listen through headphone

1
Plug a headphone into the

Connect power

Caution
•
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
•
Before connecting the AC power cord, ensure
you have completed all other connections.
1
Connect the AC power cord to the wall
socket.
16 EN
socket.

4 Get started

Caution
•
Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Install remote control
batteries
Caution
•
Risk of explosion! Keep batteries away from
heat, sunshine or fire. Never discard batteries
in fire.
•
Risk of decreased battery life! Never mix
different brands or types of batteries.
•
Risk of product damage! When the remote
control is not used for long periods, remove
the batteries.
1
Open the battery compartment.
2
Insert 2 R03 AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
a b c