Listen To Radio; Tune To A Radio Station; Program Radio Stations Automatically; Program Radio Stations Manually - Philips MCD170/12 User Manual

6 Listen to radio

Tune to a radio station

1
Press TUNER repeatedly to select FM or
MW.
2
Press and hold
seconds.
»
[SEARCH] is displayed.
»
The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
• To tune to a weak station, press
repeatedly until you fi nd optimal
reception.
Program radio stations
automatically
Note
•
You can program a maximum of 40 preset radio
stations.
1
In the tuner mode, press and hold
PROG/ANGLE for more than 2 seconds
to activate automatic program mode.
»
[AUTO] is displayed.
»
All available stations are programmed
in the order of waveband reception
strength.
»
The fi rst programmed radio station is
broadcast automatically.
20 EN
/ for more than 2
Program radio stations
manually
Note
•
You can program a maximum of 40 preset radio
stations.
1
Tune to a radio station.
2
Press PROG/ANGLE to activate program
mode.
»
[PROG] blinks on the display.
3
Press /
to this radio station, then press PROG/
/
ANGLE to confi rm.
»
The preset number and the frequency
of the preset station are displayed.
4
Repeat the steps above to program other
stations.
Note
•
To overwrite a programmed station, store another
station in its place.

Select a preset radio station

1
Press /
Tip
•
Position the antenna as far as possible from TV, VCR
or other radiation source.
•
For optimal reception, fully extend and adjust the
position of the antenna.
to allocate a number (1 to 40)
to select a preset number.