Reinstall Radio Stations; Program Radio Stations Manually; Select A Preset Radio Station; Delete A Preset Radio Station - Philips MCD802/12 User Manual

3
Repeat step 2 to tune to more stations.
• To tune to a weak station, press
/ repeatedly until you fi nd optimal
reception.
Note
•
If the FM radio station transmits RDS (Radio Data
System) data, the name of the radio station is displayed.

Reinstall radio stations

1
Press TUNER.
2
Press and hold PROG for more than 2
seconds.
»
All previously stored radio stations are
replaced.

Program radio stations manually

You can program a maximum of 40 preset radio
stations.
1
Tune to a radio station.
2
Press PROG to activate program mode.
3
Press / to allocate a number to this radio
station, then press PROG to confi rm.
»
The preset number and the frequency of
the preset station are displayed.
4
Repeat the above steps to program other
stations.
Tip
•
To overwrite a programmed station, store another
station in its place.

Select a preset radio station

1
In tuner mode, press /
number.

Delete a preset radio station

1
In tuner mode, press /
number.
2
Press and hold
number) DELETE" appears.
»
The selected preset radio station continues
to play but is deleted from the list.
22 EN
to select a preset
to select a preset
until " FM X (preset

9 Other features

Set the alarm timer

This unit can be used as an alarm clock. The DISC,
TUNER or AUX is activated to play at a preset time.
1
Ensure that you have set the clock correctly.
2
In standby mode, press and hold TIMER.
»
The time digits are displayed and begin to
blink.
3
Press DISC, TUNER or AUX/MP3-LINK to
select a source.
4
Press / to set the hour.
5
Press / to set the minute.
6
Press TIMER to confi rm.
»
The timer is set and activated.
Activate and deactivate the alarm timer
1
In standby mode, press TIMER.
2
Press repeatedly to activate or deactivate
the timer.
»
If the timer is activated, the display shows
.
»
If the timer is deactivated,
the display.
Note
•
If disc source is selected and the track cannot be played,
tuner is activated automatically.

Set the sleep timer

This unit can switch to standby automatically after a
set period of time.
1
When the unit is turned on, press SLEEP
repeatedly to select a set period of time (in
minutes).
»
When sleep timer is activated, the display
shows .
To deactivate sleep timer
1
Press SLEEP repeatedly until [OFF] (off ) is
displayed.
»
When sleep timer is deactivated,
disappears on the display.

Karaoke

1
Turn on the TV to the correct viewing channel
for this unit.
disappears on