Connect Fm Antenna; Connect Audio Cables - Philips MCD909 User Manual

a b
For the speaker side:
1
Unscrew the speaker connectors.
2
For the left speaker, identify the speaker
cable that is connected to the left
connectors on the main unit.
3
Insert fully the red end of the speaker
cable into the red (+) connector.
4
Screw the red (+) connector to secure
the cable.
5
Insert fully the silver end of the speaker
cable into the black (-) connector.
6
Screw the black (-) connector to secure
the cable.
7
Repeat steps 2-6 for the right speaker.
12 EN
c

Connect FM antenna

Tip
•
For optimal reception, fully extend and adjust
the position of the antenna.
• For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL jack.
•
The unit does not support MW radio
reception.
1
Connect the supplied FM wire antenna to
the FM AERIAL socket on the unit.

Connect audio cables

To hear audio from other audio devices as well
as the accompanied speakers, select a preferred
audio connection:
• Option 1: connect a coaxial cable
• Option 2: connect an optical cable
• Option 3: connect analog audio
cables