Listen To Radio; Tune To A Radio Station; Program Radio Stations Automatically; Program Radio Stations Manually - Philips MCD107 User Manual

6 Listen to radio

Tune to a radio station

1
Press TUNER repeatedly to select FM.
2
Press and hold
seconds.
»
[SEARCH] (search) is displayed.
»
The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station, press
/
reception.
Program radio stations
automatically
Note
You can program a maximum of 20 preset
radio stations.
1
In the tuner mode, press and hold PROG/
ANGLE for more than 2 seconds to
activate automatic program mode.
»
[AUTO] (auto) is displayed.
»
All available stations are programmed
in the order of waveband reception
strength.
»
broadcast automatically.
18 EN
/ for more than 2
Program radio stations
manually
Note
You can program a maximum of 20 preset
radio stations.
1
Tune to a radio station.
2
Press PROG/ANGLE to activate program
mode.
»
[PROG] blinks on the display.
3
Press / to allocate a number (1 to 20)
to this radio station, then press PROG/
ANGLE
»
The preset number and the frequency
of the preset station are displayed.
4
Repeat the steps above to program other
stations.
Note
To overwrite a programmed station, store
another station in its place.

Select a preset radio station

1
Press / to select a preset number.
Tip
Position the antenna as far as possible from
TV, VCR or other radiation source.
For optimal reception, fully extend and adjust
the position of the antenna.