Turn On Progressive Scan; Change System Menu Language - Philips MCD909 User Manual

Turn on Progressive Scan

Progress scan displays twice the number of
frames per seconds than interlaced scanning
(ordinary TV system). With nearly double the
number of lines, progressive scan offers higher
picture resolution and quality.
Before you turn on this feature, ensure that:
• The TV supports progressive scan
signals.
• You have connected this unit with
the TV through component video.
1
Turn on the TV.
2
Ensure that the TV progressive scan
mode is deactivated (see the TV user
manual).
3
Switch the TV to the correct viewing
channel for this unit.
4
Press DISC.
5
Press SYSTEM MENU.
6
Press to select [Video Setup], then
press .
7
Select [Progressive]>[On], then press
OK.
»
A warning message is displayed.
8
To proceed, select [Ok] and press OK.
»
The progressive setup is complete.
Note
• If a blank/distorted screen is displayed, wait
for 15 seconds for auto recovery or turn off
progressive scan manually.
9
Press SYSTEM MENU to exit.
Change system menu
language
1
Press SYSTEM.
2
Select [General Setup]>[OSD
Language],and then press OK.
3
Select an option and then press OK.
18 EN
4
To exit the menu, press SYSTEM.