Assembling The Filter - Frymaster BK1814E Series Installation & Operation Manual

4.3.2 Assembling the Filter

1. Place the support grid in the bottom of
filter pan.
2. Put one filter paper sheet on top of the
support grid. Be sure the paper covers
the filter pan bottom and laps two
inches onto the pan wall.
3. Position the hold-down ring on top of
the filter paper. Ensure the hold-down
ring seals around the support grid.
This prevents sediment from getting
into the system.
Support grid properly placed in filter pan.
Ensure filter paper overlaps two inches on all
sides and is evenly distributed under the hold-
down ring.
Hold-down ring positioned correctly over filter
paper in filter pan.
4-4