Scanner Model Panel Options - Xerox DocuMate 4830 User Manual

• Blank threshold—you can adjust the sensitivity level of the blank image detection. For instance, if you are
scanning double-sided light-weight paper, the scanner may not detect the blank side because text or images,
from the opposite side of the page, appeared in the scanned image. In that case, lower the sensitivity level for
more accurate results.
Perform Edge Cleanup
Select this option to have the software remove any thin lines that may be around the edges in the scanned image.
These lines may appear in the edges when the item being scanned is not the exact size of the dimensions indicated
in the page size fields. This option is only available if the scanner supports this feature.
The Edge fill width slider allows you to adjust the size of the edge that needs to be filled. The width is adjustable
from approximately 1 mm to 10 mm (approximately 0.04 to 0.4 inches).
AutoCrop
Depending on the scanner model and installed software, there may be more than one auto cropping option in the
interface.
• AutoCrop to original—select this option to let the scanner automatically determine the size of the item being
scanned. This option is only available if the scanner supports this feature. This option may occasionally be
grayed out as not all scanning applications support this feature.
Always properly adjust the paper guides to the width of the paper in the input tray so that the pages feed into
the scanner as straight as possible. Skewed pages may not crop properly.
• AutoCrop to length—this option tells the scanner to crop the final image to the bottom of the page being
scanned. This option is only available if the scanner supports this feature. This option may occasionally be
grayed out as not all scanning applications support this feature.
Always properly adjust the paper guides to the width of the paper in the input tray so that the pages feed into
the scanner as straight as possible. Skewed pages may not crop properly.

Scanner Model Panel Options

The options in this panel are specific to the scanner you are using. If you select an option in this panel that also
appears on the Main panel, when you return to the Main panel, that option will be selected. Select the Advanced
source configuration mode to show this panel.
Xerox DocuMate 4830
User's Guide
153