7.10
Adjusting the Image Transfer Voltage
When you have unsatisfactory printing results, such as having white spots on the printed
image, having extra toner spilt on the printout, or a bluish printout, adjust the image transfer
voltage to solve these printing problems.
The image transfer voltage can be adjusted for each paper type within the range of -3 to 3
in increments of 1. The default is "0".
Use the following procedure to adjust the image transfer voltage.
1.
Press the <Menu> button on the control
panel to display the menu screen.
2.
Press the < > button until [Admin Menu] is
displayed.
3.
Press the < > or <Eject/Set> button to
accept the selection.
[Wired Network] is displayed.
4.
Press the < > button until [Maintenance
Mode] is displayed.
5.
Press the < > or <Eject/Set> button to
accept the selection.
[F/W Version] is displayed.
6.
Press the < > button until [Adjust BTR] is
displayed.
7.
Press the < > or <Eject/Set> button to
accept the selection.
[Plain Paper] is displayed.
8.
Press the < > button until the paper type
you want to set is displayed.
(Example: Recycled Paper)
9.
Press the < > or <Eject/Set> button to
accept the selection.
A screen that allows you to enter the value
is displayed.
10. Press the < > or < > button to set the
value, then press the <Eject/Set> button.
(Example: 1)
11. Press the <Menu> button to return to the
print screen.
Menu
Report / List
Menu
Admin Menu
Admin Menu
Wired Network
Admin Menu
Maintenance Mode
Maintenance Mode
F/W Version
Maintenance Mode
Adjust BTR
Adjust BTR
Plain Paper
Adjust BTR
Recycled Paper
Recycled Paper
Recycled Paper
7.10 Adjusting the Image Transfer Voltage
0 *
1 *
165