Usb Settings - Xerox DocuPrint C3300 DX User Manual

Item
Adobe Protocol

USB Settings

Specifies the settings for the USB interface.
Note
• You need to restart the printer to activate the new settings. After making the settings, switch the printer
off and then on again.
Item
Port Status
Adobe Protocol
Sets the PostScript communication protocol.
• [Auto] (default)
Automatically detects the PostScript communication protocol.
• [Standard]
Select this when the communication protocol is in ASCII format.
• [BCP]
Select this when the communication protocol is in binary format.
• [TBCP]
Select this when the communication protocol are both in ASCII and binary formats
and switches between the two using control codes.
• [Binary]
Select this when no special processing is required for data.
Note
• Select an appropriate option according to the data format specified on your print
driver.
• [Adobe Protocol] is valid only when printing in PostScript.
Sets whether or not to enable the USB port.
• [Enable](default)
• [Disable]
Sets the PostScript communication protocol.
• [TBCP] (default)
Select this when the communication protocol are both in ASCII and binary formats
and switches between the two using control codes.
• [Binary]
Select this when no special processing is required for data.
• [Auto]
Automatically detects the PostScript communication protocol.
• [Standard]
Select this when the communication protocol is in ASCII format.
• [BCP]
Select this when the communication protocol is in binary format.
Note
• Select an appropriate option according to the data format specified on your print
driver.
• [Adobe Protocol] is valid only when printing in PostScript.
Description
Description
5.2 Description of Menu Items
87