Bypass Mode; Paper Type Bypass Tray - Xerox DocuPrint 3055 User Manual

[Bypass Mode]

Printer Settings
Bypass Mode
Setting Item
Bypass Mode
[Paper Type]
Printer Settings
Paper Type
Setting Item
Tray 1
Tray 2 to Tray 4
Bypass Tray
Sets how to specify a paper size and type for the bypass tray.
• [Panel Specified]
Allows users to specify a paper size and type on the control panel.
Documents will be printed only when the values specified on your print driver
and those on the control panel match.
• [Driver Specified] (default)
Does not allow users to specify a paper size or type on the control panel. A
document is printed based on the paper size and type specified on your print
driver.
Paper Type
Paper Type
Paper Type
Paper Type
Paper Type
Bypass Tray
Sets the type of the paper loaded in the tray 1.
• [Plain Paper] (default), [Transparency], [Heavyweight 1], [Heavyweight 2],
[1. User 1] - [5. User 5]
Note
• [1. User 1] to [5. User 5] display the names specified under [Paper Name].
Sets the types of the paper loaded in the trays 2 to 4
• [Plain Paper] (default), [Transparency], [Heavyweight 1], [Heavyweight 2],
[1. User 1] - [5. User 5]
Note
• The display only shows the trays that are actually installed on the printer.
• [1. User 1] to [5. User 5] display the names specified under [Paper Name].
Sets the type of the paper loaded in the bypass tray.
• [Plain Paper] (default), [Transparency], [Heavyweight 1], [Heavyweight 2],
[1. User 1] - [5. User 5]
Note
• [Bypass Tray] appears only when [Bypass Mode] is set to [Panel Specified].
• [1. User 1] to [5. User 5] display the names specified under [Paper Name].
Description
Tray 1
Tray 2
Tray 3
Tray 4
Description
5.2 Setting the Common Menus
125