Table of Contents
Advertisement
3.2
Printing on Envelopes
This section explains how to print on envelopes.
Loading Envelopes
Feeding Envelopes in the Manual Feeder
Feed envelopes one by one with the address side facing down. The orientation and
handling of envelope flaps is as follows.
Paper feed direction
• Address side face down
• Flap closed and at the right
Note:
• Set [Portrait & Landscape (For envelopes)] on the print driver.
• Envelops may wrinkle sometimes. In that case, rotate the envelope so that the flap comes to the left side
of the feeder, and try again.
Loading Envelopes in Tray 1
Load envelopes in Tray 1 with the address side facing up. The orientation and handling of
envelope flaps is as follows.
• Address side face up
• Flap closed and at the right in the tray
Envelope orientation and feed direction
• Address side face down
• Flap closed and facing inward
Envelope orientation and feed direction
Paper feed direction
Paper feed direction
• Address side face up
• Flap closed and facing frontward in the tray.
Paper feed direction
• Address side face down
• Flap open and facing outward
Paper feed direction
3.2 Printing on Envelopes
45
Advertisement
Table of Contents
