Table of Contents
Advertisement
2.
Loosen the screw on the control board
cover of the printer, and open the cover.
3.
If a memory card is already installed, open
the retaining clips, and remove the installed
memory card.
a) Press the retaining clips at both ends of
b) Pull out the memory card toward you
4.
Hold the new memory card so that the
notch on the card comes above the center
of the card.
186
A Appendix
the memory module connector from
above to open the clips outward. The
memory card emerges.
with both hands.
notch
Advertisement
Table of Contents
