Module Configuration; Scanner Configuration - Xerox DocuMate 4790 User Manual

Scanning from TWAIN and WIA

Module Configuration

When image processing modules are installed they will appear in the list on the Configure tab. Use this tab to
enable the modules you want to use when scanning.
There are some features in the scanner interface that are disabled until a module is installed that contains those
options. When the module is installed, the features will enable in the scanner interface for you to use them.
Reordering the Modules
Select a module in the list and click the up or down arrow to change the order of the module in the list. Changing
the order of the modules changes the order in which the image processing options are used. For example, if there
are two modules installed and both modules include an automatic image rotation option, the first module's
rotate option is used and the rotate setting in the second module is ignored so that the image is not rotated
twice.

Scanner Configuration

The scanner configuration tab shows the hardware information for your scanner.
Color correction:
Select the optimization style for color correction.
• "Printer" will optimize the image for duplicating on a printer.
• "Monitor" will optimize the image for displaying on a monitor.
Images optimized for a monitor, when printed, will not match the original scanned item.
Select Perform Color Correction
option.
Power adjustments:
• Sleep mode—sleep mode is the low-power state when the scanner is not in use. You can adjust the amount
of time you want the scanner to wait before it goes into low power.
Click the green enter button to save any changes in the Sleep mode field.
Click the red reset button to reset to the default timeout value.
7-146 ®
Xerox DocuMate
User's Guide
on the Color Processing tab in the Image Enhancements section to enable this
®
4790