Color Processing Panel Options - Xerox DocuMate 4790 User Manual

Scanning from TWAIN and WIA
• The size of the margin is 24.4 mm
• The position of the hole cannot be flush to the edge of the margin area and it cannot overlap the edge of
the margin area

Color Processing Panel Options

The options in this panel are for setting how the scanner should process colors in specific color modes.
Color Dropout
Color dropout tells the scanner and software to remove a specific color from the image. You can choose either
Red, Green, or Blue, or define a custom color, to be dropped out of an image.
To input a custom color using its RGB value, select Custom in this list and then input the values for R, G, and B in
their appropriate boxes, where R, G, and B are numbers from 0 to 255.
Tolerance—use the slider to adjust the precision of the color dropout.
• More precise—this option removes a range of colors closest to the pure color selected or defined in the
custom fields. For example, pure red has an R/G/B value of 255/0/0. Selecting Red indicates that the scanner
should look for a range of RGB reds close to pure red and remove them from the image.
• More approximate—this option removes a wider range of colors based on the pure color selected in the list
or defined in the custom fields.
7-140 ®
Xerox DocuMate
User's Guide
®
4790