Setting Items - Xerox DocuPrint C3120 DX User Manual

Setting Items

Bypass Feed Orientation - Sets the orientation of the paper when printing from the
bypass tray. When loading the paper with one of the short edges facing into the bypass
tray, select [Portrait]. When loading the paper with one of the long edges facing into the
bypass tray, select [Landscape]. If the orientation can only be one way or the other
depending on the paper size, the actual orientation of the paper overrides this setting.
Collated - Sets whether or not to collate multiple-page documents.
Feed Separators from - Sets the paper tray for separators when using the
Transparency Separators feature. Selecting [Auto] uses the paper tray selected on the
printer.
Print on Separators - Sets whether or not to print on separators. Selecting [Blank
Separators] inserts blank separators. Selecting [Printed Separators] prints the same
contents printed on transparencies to separators.
Substitute Tray - Sets what action to take when the [Paper] tab > [Paper source] is set
to [Auto Select Tray] and the paper of the size you requested is not loaded in the printer.
Use Printer Settings - Uses the settings configured on the printer.
Display Message - Displays a message on the control panel that prompts you to
load the paper. Your document will not be printed until you load the paper in the
printer.
Use Nearest Size (Adjust to Fit) - Uses the paper of the nearest size and prints the
document at 100% magnification or at a reduced magnification if necessary.
Use Nearest Size (No Zoom) - Uses the paper of the nearest size and prints the
document at 100% magnification.
Use Larger Size (Adjust to Fit) - Uses the paper of a larger size and prints the
document at 100% magnification or at a reduced magnification if necessary.
Use Larger Size (No Zoom) - Uses the paper of a larger size and prints the
document at 100% magnification.
Feed from Bypass Tray - Feeds the paper from the bypass tray when it is not
loaded in the paper trays.
Custom Paper Auto Orientation - If printing on user-defined paper, selecting [On]
corrects the orientation of the paper. If your document was printed 90 degrees rotated
on the paper, set this feature to [On].
Image Enhancement - Sets whether or not to use the Image Enhancement feature.
Selecting [On] artificially enhances resolution by smoothing out the edges of images.
Images (bitmaps) that consist of rough dots may not be reproduced with smooth
gradations. In such case, set this feature to [Off]. Selecting [On] or [Off] does not affect
print speed.
Draft Mode - Selecting [On] prints with less toner and thus the colors become lighter.
Use this feature to save toner when printing documents that do not require high image
quality.
Skip Blank Pages - Sets whether or not to skip blank pages during printing.
Halftone Screen Lock - Sets halftone screens. Selecting [On] prioritizes the settings
on the printer over the settings on the application.
Installation and Configuration on Windows 98/Me
19