[Paper/Output] Tab; Setting Items - Xerox DocuPrint C3120 DX User Manual

[Paper/Output] Tab

The following explains how to configure the [Paper/Output] tab in the Default dialog
box.

Setting Items

Job Type - Sets the type of your print job to [Normal Print], [Secure Print], or [Sample
Set].
Normal Print - Prints a job without using the Secure Print or Sample Set feature.
Secure Print - Temporarily stores a print job in the printer, rather than printing it
immediately, until you manually start the printing from the control panel.
Sample Set - Allows you to print a proof copy of a multi-set job and prints the entire
sets once the print result has been verified. If you set the print quantity to 1, this
setting automatically changes to [Normal Print].
NOTE: To select [Secure Print] and [Sample Set], the [Device Settings] tab > [RAM
Disk] must be set to [Available].
Setup - This button becomes active when [Job Type] is set to [Secure Print] or [Sample
Set]. Clicking the button displays the [Secure Print] or [Sample Set] dialog box.
User ID - Sets the user ID for the Secure Print or Sample Set feature with up to 8
alphanumeric characters.
Enter a 0-12 Digit Secure Print Password - Sets the password associated with the
user ID for the Secure Print feature. The password can be up to 12 alphanumeric
characters. Asterisks (***) appear instead of text as you enter the password in this
text box.
NOTE: [Enter a 0-12 Digit Secure Print Password] appears only on the [Secure
Print] dialog box.
Installation and Configuration on Windows NT 4.0
39