Resetting To Factory Defaults - Fuji Xerox DocuPrint CP105 b User Manual

Resetting to Factory Defaults

After Initializing the Non-Volatile Memory (NVM) and rebooting the printer, all the menu parameters or
data are reset to their factory default values.
1
Turn off the printer.
2
Open the rear door.
3
While holding down the
on the printer.
4
After the (Start),
button and (Cancel Job) button.
5
Close the rear door.
The printer starts initializing the NVM.
IMPORTANT:
• Never attempt to turn off the printer. The printer will cease to function.
The printer restarts automatically to apply the settings and prints the Printer Settings and Panel
Settings pages.
6
Check if the factory settings are restored by referring to the Printer Settings and Panel Settings
pages.
(Start) button and the
(Energy Saver), and (Error) indicators go out, release the
(Cancel Job) button at the same time, turn
Using the Operator Panel
(Start)
102