Table of Contents
Advertisement
7
Troubleshooting
When Paper Jams
CAUTION
• When removing jammed paper, make sure that no pieces of torn paper are left in the machine. A piece
of paper remaining in the machine can cause fire. If a sheet of paper is wrapped around the heat roller,
or when clearing a jammed paper that is difficult or impossible to see, do not try to remove it by yourself.
Doing so can cause injuries or burns. Switch off the machine immediately, and contact our Customer
Support Center or your dealers.
• The fuser unit, and the surrounding area are hot. You may get burnt if you touch it directly.
Following the message on the control panel, open the cover or unit, and remove the jammed paper. If the
paper is torn, check for any remaining torn pieces of paper.
Cover A
Refer to "Near the Center Output Tray"
(P. 35) on how to remove the paper.
Bypass Tray
Tray 1, Tray 2
34
7 Troubleshooting
When the duplex unit is installed
Refer to "Inside the Duplex Unit"
(P. 35) on how to open cover C
and the unit D and remove the
paper.
Cover G (Tray 1), Cover H (Tray 2)
Cover F
Cover C
Cover E
Cover F
Refer to "Near the Fuser Unit"
(P. 36) on how to remove the
paper.
Cover E
When using the bypass tray, check to
make sure there is no jammed paper in
it.
Unit D
Advertisement
Table of Contents
