Xerox 4127 User Manual page 79

Programming
1. Select PDF on the Print Mode screen.
2. Select Programming.
3. Enter the 3-digit item number in the Item Number field. Refer to the following table for
parameters, item numbers, and values.
4. Select Change Value.
5. Enter the required value in the New Value field.
6. Select Save.
Parameter
Print Sets
2 Side Print
Print Mode
Sort
Layout
Paper Size
Item
401 1-999 (Default: 1)
Specify the number of print sets.
402 0: Off (Default)
1: LEF Binding
2: SEF Binding
Specify which edge of the paper is to be bound for
double-sided printing; Long Edge Feed or Short Edge
Feed.
403 0: Standard (Default)
1: Fast
2: High Quality
404 0: Off (Default)
1: On
Enable or disable sorting.
405 0: Auto Reduce/Enlarge (Default)
1: Booklet
2: Two-up
3: Four-up
4: 100% (actual size)
[Auto Reduce/Enlarge] prints with magnification to fit
the paper size selection.
[Booklet] specifies duplex printing.
[Two-up] and [Four-up] print two and four pages on a
single sheet of paper.
406 0: Auto
1: A4 or Letter (Default)
Machine Status
Value
Xerox 4112/4127 EPS
User Guide
5-19