Xerox 4127 User Manual page 117

Category
Error Code
Print/Other
016-721 P, O
016-722 P
016-723 P
016-732 P
016-738 P
016-739 P
016-740 P
016-746 P
016-748 P, O
016-749 P
016-755 P
016-761 P
Cause and Remedy
Cause: An error occurred during print processing. Probable
cause is:
Printing was instructed by Automatic Tray Selection when
Paper Type Priority is set to Automatic Tray switching Off
for all paper in the Common Settings.
Remedy: When printing by Automatic Tray Selection, set one
of the paper types to a setting other than
Automatic Tray switching Off in Paper Type Priority.
Refer to "Paper Type Priority" in the System Administration
Guide.
Cause: Unsupported staple position is specified.
Remedy: Confirm the position, and specify the print data
again.
Cause: Unsupported punch position is specified.
Remedy: Confirm the position, and specify the print data
again.
Cause: Unable to use registered form specified by Emulation
with host.
Remedy: Resend the form data.
Cause: Booklet Creation is not applied to the specified paper.
Remedy: Specify the printable paper size for booklet
creation.
Cause: The specified document and paper size are an
unauthorized combination.
Remedy: Specify the combination of the printable document
and paper size for booklet creation.
Cause: Booklet Creation is not applied to the specified paper
tray.
Remedy: Specify the printable paper tray for booklet
creation.
Cause: An unsupported feature is included in received PDF.
Remedy: Print using printer driver.
Cause: Printing is not possible due to insufficient hard disk
space.
Remedy: Reduce the number of pages of print data, for
example, by dividing up the print data.
Cause: A PJL command syntax error occurred.
Remedy: Either confirm the print settings, or correct the PJL
command.
Cause: Attempted to process PDF file which was specified to
printing prohibited.
Remedy: Cancel the printing prohibited specification using
Adobe Reader and try to print again.
Cause: An error occurred during image processing.
Remedy: Set the Print Mode to Speed Priority and start
printing again. If this does not remedy the error, print in the
Ensure Print mode.
Xerox 4112/4127 EPS
Problem Solving
7-15
User Guide