Paper Jams At Z Folding Unit; Paper Jams At Lever 2A And Knob 3A - Xerox 4127 User Manual

Paper Jams at Z Folding Unit

Paper jams at lever 2a and knob 3a

Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.
1. Make sure that the machine has stopped printing and then open the right cover on the
light finisher.
2. Move lever 2a up and turn knob 3a to the left. Remove the jammed paper.
Note
If paper is torn, check inside the machine and remove it.
3. Return lever 2a to the original position.
4. Close the Finisher right cover completely. The machine will not operate if the cover is open
even slightly.
Problem Solving
Xerox 4112/4127 EPS
User Guide
7-41