Xerox 4127 User Manual page 114

Problem Solving
Symptoms
Printing performed with a
different paper size
If NO, go to next symptom.
The image is cut off on the edge
of the paper
If NO, go to next symptom.
The printed font differs from the
font specified on the computer
If NO, go to next symptom.
Printing is slow
If NO, go to next symptom.
The settings specified for print
options do not take effect
If NO, go to next symptom.
There is no edge
7-12 Xerox 4112/4127 EPS
User Guide
YES Cause Paper size provided is different from the
specified tray size.
Action Change the paper size set in the tray, or
change print options to specify a tray that
contains the appropriate size.
YES Cause Image exceeds the printable area of the
machine.
Action Increase the printable area of the machine, or
decrease the document print area.
YES Cause Font replacement is configured on the print
driver.
Action Check the font replacement table.
If problem is not solved, go to next Cause/
Action.
Cause Non-standard fonts are used for printing.
Action Check the application or print driver settings.
If PostScript is being used, download the
required fonts.
YES Cause The print mode specifies Print Quality.
Action When printing image data that has image
quality as a priority, such as pictures, the print
speed decreases. Turn off the quality priority
in the print mode.
YES Cause A print driver for another model is in use.
Action Install the print driver for this model.
If problem is not solved, go to next Cause/
Action.
Cause The optional apparatus cannot be attached
to the printer.
Action Check the options attached with this printer
and reset the printer configuration.
YES Cause Image exceeds the printable area of the
machine.
Action Increase the printable area of the machine, or
decrease the document print area.
Causes and Actions