Taking Pictures By Using The Flash - Panasonic Lumix DMC-GF6 Owner's Manual

Panasonic digital cameras owner's manual
Hide thumbs Also See for Lumix DMC-GF6:
Table of Contents

Advertisement

Recording

Taking pictures by using the flash

Applicable modes:
Open/Close the built-in flash
Taking a picture using the flash becomes
possible by opening the built-in flash.
A To open the flash
Press the flash open button.
B To close the flash
Press the flash until it clicks.
Be sure to close the built-in flash when not in
use.
The flash setting is fixed to [Œ] while the flash
is closed.
Be careful when opening the flash as the flash will jump out.
Be careful not to catch a finger when closing a flash bulb.
The available flash range
If the distance to the subject is close when taking a picture using a flash, part of the
recorded image becomes dark because the light of flash is blocked by the lens or it
becomes out of flash range. Check the distance to the subject when taking a picture. The
distance at which light from the flash is blocked by lens, and the distance to which light
from the flash is delivered vary depending on the lens used.
[AUTO] in
[Sensitivity]
When the interchangeable lens (H-PS14042) is used
Wide
40 cm (1.3 feet) to 5.7 m (19 feet)
Available flash range
30 cm (0.98 feet) to 3.5 m (11 feet)
130
Tele

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents