Taking Pictures By Using The Flash; Changing Flash Mode - Panasonic Lumix DMCGX7KK Basic Owner's Manual

Recording

Taking pictures by using the flash

Applicable modes:
∫ Open/Close the built-in flash
Taking a picture using the flash becomes
possible by opening the built-in flash.
A To open the flash
Slide the flash open lever.
B To close the flash
Press the flash until it clicks.
•
Make sure to close the built-in flash when it is
not in use.
•
The flash setting is fixed to [Œ] while the flash
is closed.

Changing Flash Mode

Applicable modes:
Set the built-in flash to match the recording.
•
Open the flash.
1
Select the menu.
[MENU] > [Rec]>[Flash]
2
Press 3/4 to select [Flash Mode] and then press [MENU/SET].
3
Press 3/4 to select the item and then press [MENU/SET].
60
VQT5A95 (ENG)