Panasonic Lumix DMC-GF6 Owner's Manual page 50

Preparation
[Speaker Volume]
•
When you connect the camera to a TV, the volume of the TV speakers does not change.
[Monitor Display]
•
Some subjects may appear differently from actuality on the monitor. However, this does not
affect the recorded pictures.
[Monitor Luminance]
•
The brightness of pictures displayed on the monitor is enhanced, so some subjects on the
monitor may appear different from the actual subjects. However, this enhancement does not
affect recorded pictures.
•
The monitor automatically returns to standard brightness if no operations are performed for
30 seconds when recording in [MODE1]. It will light up brightly again with button or touch
operation.
•
When [AUTO] or [MODE1] is set, the usage time is reduced.
•
[AUTO] is only available in the Recording Mode.
•
The initial setting when using the AC adaptor (optional) is [MODE2].
Adjust the volume of the speaker to any of the 7 levels.
Brightness, color, or red or blue tint of the Monitor is adjusted.
[ ] ([Brightness]):
Adjust the brightness.
[ ] ([Contrast · Saturation]):
Adjust the contrast or clarity of colors.
[ ] ([Red Tint]):
Adjust the red tint.
[ ] ([Blue Tint]):
Adjust the blue tint.
1
Touch the item.
2
Drag the slide bar to adjust.
•
Adjusting can also be performed by rotating the control dial.
3
Touch [Set].
Sets the monitor brightness according to the ambient light level.
„ [AUTO]:
The brightness is adjusted automatically depending on how bright
it is around the camera.
...
[MODE1]:
1
Make the monitor brighter.
...
[MODE2]:
2
Set the monitor to the standard brightness.
...
[MODE3]:
3
Make the monitor darker.
50