Panasonic Lumix DMC-GF6 Owner's Manual page 311

Others
Striping or flicker may appear under lighting such as fluorescent lighting and
LED lighting fixture.
•
This is characteristic of MOS sensors which serve as the camera's pickup
sensors.
This is not a malfunction.
•
When you see noticeable flicker or striping while recording a motion picture,
you can reduce the flicker or striping by setting up [Flkr Decrease]
and fixing the shutter speed. It is possible to select a shutter speed from
[1/50], [1/60], [1/100], or [1/120].
You can set the shutter speed manually in the Creative Video Mode.
The brightness or the hue of the recorded picture is different from the actual
scene.
• When recording under fluorescent or LED lighting fixture, etc., increasing the shutter speed
may introduce slight changes to brightness and color. These are a result of the characteristics
of the light source and do not indicate a malfunction.
•
When recording subjects in extremely bright locations or recording under fluorescent lighting,
LED lighting fixture, mercury lamp, sodium lighting, etc., the colors and screen brightness may
change or horizontal striping may appear on the screen.
Bright spot not in subject is recorded.
•
There may be defective pixels in the image sensor. Perform [Pixel Refresh] (P55).
The function lever does not work.
> Set the [Function Lever] to [AUTO].
Subject cannot be locked.
(AF tracking not possible)
•
If the subject contains sections that differ in color to the surroundings, touch those sections or
the main colors of the subject to set the AF frame (P151).
Operation sound is small.
•
Is your finger covering up the speaker?
Recording by Panorama Shot Mode is ended before finishing.
•
If the camera is moved too slowly, the camera has assumed that camera motion was stopped
and will end the still picture recording.
•
If there is a great deal of shaking towards the recording direction while moving the camera,
recording will end.
(P19)
(P13)
311
(P201)
(P198)