Panasonic Lumix DMC-GF6 Owner's Manual page 322

Others
The card is not recognized by the PC.
> Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
> If there are two or more USB terminal on a single PC, try connecting the USB connection
cable to another USB terminal.
The card is not recognized by the PC. (SDXC memory card is used.)
> Check if your PC is compatible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
> A message prompting to format the card may be displayed when connecting, but do not
format.
> If the [Access] displayed on the monitor does not disappear, disconnect the USB
connection cable after turning this unit off.
The picture cannot be printed when the camera is connected to a printer.
• Pictures cannot be printed using a printer that does not support PictBridge.
> Set to [PictBridge(PTP)] in [USB Mode]. (P51,
The ends of the pictures are cut at printing.
> When using a printer with a Cropping or borderless printing function, cancel this function
before printing. (For details, refer to the operating instructions for the printer.)
> When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can
be printed.
The panorama picture is not printing correctly.
•
Since aspect ratio of a panorama picture differs from normal pictures, it may not always be
possible to print it correctly.
> Please use a printer that supports panorama pictures. (For details, please see the
operating instructions of your printer.)
> We recommend using the "PHOTOfunSTUDIO" software on the CD-ROM (supplied) to
adjust the size of the still picture to the print paper size.
284)
322