Others
The recorded picture is whitish.
•
Picture might look whitish when lens or image sensor gets dirty with fingerprints or similar.
> If the lens is dirty turn the camera off and then gently wipe the lens surface with a soft, dry
cloth.
> Refer to
P326
when the image sensor gets dirty.
The recorded picture is too bright or dark.
> Check that the exposure is correctly compensated.
•
Is the AE Lock
(P161)
Multiple pictures are taken at one time.
> Cancel the settings of White Balance Bracket (P146).
•
Is the Burst
(P164)
> Set the drive mode to Single.
•
Is the self-timer
(P170)
The subject is not focused properly.
•
The subject is beyond the focus range of the camera.
•
There is camera shake (jitter) or the subject is moving slightly.
•
Is [Focus/Release Priority] in the [Custom] menu set to [RELEASE]?
In this case, the picture may not be properly focused even if [AFS], [AFF] or [AFC] in [Focus
Mode] is set.
•
Is the AF Lock
(P161)
applied incorrectly?
or Auto Bracket
(P167)
(P58)
set to [
]?
applied incorrectly?
(P138)
set?
(P59)
(P122)
309
(P156)