Honda 2010 Insight Owner's Manual page 375

Wiper Blades
BLADE
3. Remove the blade from its holder
by grabbing the tabbed end of the
blade. Pull firmly until the tabs
come out of the holder.
372
4. Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
BLADE
REINFORCEMENT
Make sure the two rubber tabs
inside the blade fit to each notch of
the reinforcement, as shown.
2010 Insight
5. Place the top of the wiper blade on
the end of the blade assembly, and
slide the blade onto the assembly.
Make sure the blade is completely
installed.