Honda 2010 Insight Owner's Manual page 203

Playing the AM/FM Radio (Models with navigation system)
SEEK The seek function
searches up and down from the
current frequency to find a station
with a strong signal. To activate it,
press and hold the or
the TUNE bar until you hear a beep,
then release it.
SCAN The scan function samples
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
When the system finds a strong
signal, it will stop and play that
station for about 10 seconds.
If you do nothing, the system will
then scan for the next strong station
and play it for 10 seconds. When it
plays a station you want to listen to,
press the SCAN button again.
200
Preset Each preset button can
store one frequency on AM and two
frequencies on FM.
side of 1. Select the desired band, AM or
FM.
2. Use the tune, seek, or scan
function to tune the radio to a
desired station.
3. Pick a preset button, and hold it
until you hear a beep.
4. Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
2010 Insight
Each preset button's frequency is
shown on the bottom of the audio
display.