Lights
Replacing a Front Parking Light
Bulb
HOLDING CLIP
1.
Open the hood.
To change the bulb on the right
side, remove the upper part of the
windshield washer reservoir tank.
Use a flat-tipped screwdriver to
remove the holding clip, then
remove the upper part by pulling it
straight up.
362
SOCKET
2.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
3.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
2010 Insight
4.
Install the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
BULB
5.
Turn on the lights to make sure
the new bulb is working.
(Right side)
6.
Install the upper part of the
windshield washer reservoir tank
in the reverse order of removal.