Honda 2010 Insight Owner's Manual page 364

(Right side)
10. Install the upper part of the
windshield washer reservoir tank
in the reverse order of removal.
Low Beam Headlight
CONNECTOR
1. Open the hood.
2. Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
3. Remove the bulb from the
headlight assembly by turning it
one-quarter turn counterclockwise.
2010 Insight
4. Install the new bulb, and turn it
one-quarter turn clockwise to lock
it in place.
BULB
5. Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
6. Turn on the headlights to test the
new bulb.
Lights
361