Honda 2010 Insight Owner's Manual page 122

Turn Signal Push down on the
left lever to signal a left turn and up
to signal a right turn. To signal a lane
change, push lightly on the lever and
hold it. The lever will return to the
center when you release it or
complete a turn.
Headlights Turning the switch to
the '' '' position turns on the
parking lights, taillights, instrument
panel lights, side-marker lights, and
rear license plate lights.
Turning the switch to the ''
position turns on the headlights.
When the light switch is in the
'' '' or '' '' position, the
lights on indicator comes on as a
reminder.
This indicator stays on if you leave
the lights on and turn the ignition
switch to the ACCESSORY (I) or
LOCK (0) position.
If you leave the lights on with the
key removed from the ignition
switch, you will hear a reminder
chime when you open the driver's
door.
2010 Insight
Turn Signals and Headlights
High Beams Push the left lever
forward until you hear a click. The
blue high beam indicator will come
on (see page 69 ). Pull the lever back
to return to the low beams.
'' To flash the high beams, pull the
lever back lightly, then release it.
The high beams will stay on as long
as you hold the lever back.
119