Oil Check - Honda 2010 Insight Owner's Manual

Service Station Procedures
GRIP
SUPPORT ROD
3. Holding the grip, pull the support
rod out of its clip. Insert the end
into the designated hole in the
hood.
288
To close the hood, lift it up slightly to
remove the support rod from the
hole. Put the support rod back into
its holding clip. Lower the hood to
about a foot (30 cm) above the
fender, then let it drop. Make sure it
is securely latched.
CLIP
2010 Insight

Oil Check

DIPSTICK
Wait a few minutes after turning the
engine off before you check the oil.
Remove the dipstick (orange loop).
1.
2. Wipe off the dipstick with a clean
cloth or paper towel.
3. Insert the dipstick all the way back
into its hole.