Table of Contents
Advertisement
6
Check the year in line '
the number buttons 0-9 on the remote control.
7
Select the next line with ;qP or P r= .
8
Check if the displayed settings for '
correct.
9
When all information is correct, save by pressing OK . '
briefly flash in the video recorder display.
The initial installation is now complete.
If you are connecting a satellite receiver, please read the section 'Using the
satellite receiver'.
If you are connecting a decoder, you must install it as described in the next
section.
a
b If sound disruptions should occur for several saved TV channels or there is
no sound at all, it is possible that the incorrect TV system was saved for
this TV channel. In the chapter 'Manual TV channel search' you will find the
information on how to change the TV system.
'. If required, please change the year with
', '
' and '
Installing your video recording
' are
' will
Advertisement
Table of Contents
