Table of Contents
Advertisement
BBC1
Installing your video recording
Some TV channels transmit encoded TV signals which can only be viewed with a commercially
purchased or hired decoder without disturbances. You can connect such a decoder
(descrambler) to this video recorder. The following function will automatically activate the
connected decoder for the desired TV channel.
1
Switch the TV on. If applicable, select the programme number for the
video recorder operation.
2
Use the buttons ;qP , P r= on the video recorder or the number
buttons 0-9 on the remote control to select the TV channel which
you would like to allocate the decoder to.
3
Press the button MENU on the remote control. The main menu will
appear.
4
Use the buttons
' and confirm with OK .
5
Use the buttons P r= or ;qP to select the line '
6
Use the buttons Q or P to select '
P
Use the button
on the screen to select '
7
Confirm with OK .
8
End with the button MENU .
The decoder has now been allocated to this TV channel.
If this TV channel is chosen, the symbol '
;qP or
P r= to select the line '
' (Decoder switched on).
' (Decoder switched off).
' will appear in the video recorder display.
'.
Advertisement
Table of Contents
