Table of Contents
Advertisement
Other functions
If you use a second video recorder that reacts to the same remote control command (stop, play,
record, etc.) as this video recorder, then you can change the remote control and this video
recorder.
1
Switch on the TV set. If required, select the programme number for
the video recorder.
2
Press MENU on the remote control. The main menu will appear.
3
Press the SELECT button on the remote control. In addition, press
the number button 2 to change the remote control to 'VCR2'.
4
Confirm with OK .
The main menu will disappear. If you have switched the remote
control and the video recorder to 'VCR ', '
appear on the TV screen.
You must always change both video recorder and remote control to the same
setting, e.g. video recorder
After you change the batteries in the remote control, it will switch back to
'VCR '.
MENU
- Press
. The main menu will appear.
SELECT
- Press the
1
button
to change the remote control to 'VCR '.
OK
- Confirm with
This picture will appear on the screen: '
a
b The remote control command was not recognised by the video recorder.
Repeat step 3 .
a
b Remote control and video recorder were not both changed. If you press a
button for a long time, the video recorder settings appear in the display. In
this case 'VCR '. You need to also change the remote to 'VCR ' (button
SELECT
2
and
).
remote control to 'VCR ' or 'VCR '.
VCR
button on the remote control. Then press the number
on the remote control. The main menu will disappear.
VCR
' will
'
Advertisement
Table of Contents
