Manual Tv Channel Search; Using The Satellite Receiver - Philips VR740/02 User Manual

7.
7.
Use to select 'ON'
FWD 1- B
(Decoder switched on).
8.
8.
To end, press
STATUS/EXIT
The decoder has now been allocated to this TV
channel.
How can I switch off the decoder?
Use to select 'OFF' (Decoder
FWD 1- B
switched off).

Manual TV channel search

In some cases it can occur that all TV channels
are not found and saved during the first installa-
tion. In this case, the missing TV channels must
be searched for and stored manually.
1.
1.
Switch on the TV set. If required, select the
programme number for the video recorder.
2.
2.
Press .
MENU
The main menu will appear.
3.
3.
Use
PLAY B-K STOP C-L
SET UP'. Then press
4.
4.
Use
PLAY B-K STOP C-L
TUNING'. Then press
5.
5.
Select 'PROG.' with
.
press FWD 1- B
MANUAL TUNING
PROG.
CHANNEL
DECODER
SKIP
SELECT K L CHOOSE B
END=EXIT
6.
6.
With
PLAY B-K
STOP C-L
desired programme number that you want to
use for the TV channel, e.g. 'P01'. Then press
.
FWD 1- B
What is a special channel?
TV channels are transmitted in certain pre-
defined frequency ranges. These ranges are
divided into channels.
A specific frequency/channel is assigned to
each TV station.
Certain frequency ranges are specified as spe-
cial channels (hyperband channels).
7.
7.
Select 'CHANNEL' with
and confirm with
desired channel with
.
to select 'TUNER
.
FWD 1- B
to select 'MANUAL
.
FWD 1- B
PLAY B-K
STOP C-L
P55
055
[OFF]
[OFF]
, select the
or
0..9
PLAY B-K
STOP C-L
. Then enter the
FWD 1- B
0..9 .
If you set ' SKIP ' on for a channel, this channel
will be ignored when going through the channels
with
PROG P+
I don't know the channels for my TV stations
In this case, press
'CHANNEL' to start the automatic channel
search. A changing channel number will appear
on the TV screen. Continue the automatic
search until you have found the desired TV
channel.
8.
8.
Save the TV channel with
9.
9. To search for other TV channels, begin again
at step 5.
10.
10. To end, press

Using the satellite receiver

Satellite channels from a satellite receiver (con-
nected to the scart socket AV2(DECODER) ) are
received on the video recorder on programme
number 'AV2' with 0.0.2 .
You should select the satellite channels to be
received by the satellite receiver directly on the
receiver itself.
. Then
,
9
or PROG P– .
PLAY B-K STOP C-L
FWD 1- B
STATUS/EXIT .
in
.
EN