Table of Contents
Advertisement
Manual TV channel search
In some cases it can occur that all of the TV
channels are not found and saved during the first
installation. In this case, the missing or coded TV
channels must be searched for and stored man-
ually.
1.
1.
Switch on the TV set. If required, select the
programme number for the video recorder.
2.
2.
Press
.
MENU
The main menu will appear.
3.
3.
Use
to select 'TUNER SET UP'.
K B
L C
Then press
B 1
4.
4.
Use
to select 'MANUAL TUNING'.
K B
L C
Then press
B 1
5.
5.
Select 'PROG.' with
.
B 1
MANUAL TUNING
PROG.
CHANNEL
DECODER
SKIP
SELECT K L CHOOSE B
END=EXIT
6.
6.
With
or
K B
L C
programme number that you want to use for
the TV channel, e.g. 'P01'. Then press
What is a special channel?
TV channels are transmitted in certain pre-
defined frequency ranges. These ranges are
divided into channels.
A specific frequency/channel is assigned to each
TV station.
Certain frequency ranges are specified as special
channels (hyperband channels).
7.
7.
Select 'CHANNEL' with
firm with
. Then enter the desired chan-
B 1
nel with
0..9
.
If you set ' SKIP ' on for a channel, this channel
will be ignored when going through the channels
with
P+
or
P–
.
I don't know the channels for my TV stations
In this case, press
K B
start the automatic channel search. A changing
channel number will appear on the TV screen.
Continue the automatic search until you have
found the desired TV channel.
8.
8.
Save the TV channel with
9.
9.
To search for other TV channels, begin again
at step 5.
10.
10.
To end, press
STATUS/EXIT
.
.
K B
L C
. Then press
P55
055
[OFF]
[OFF]
, select the desired
0..9
, and con-
K B
L C
in 'CHANNEL' to
L C
.
B 1
.
Using the satellite receiver
Satellite channels from a satellite receiver (con-
nected to the scart socket AV2(DECODER) ) are
received on the video recorder on programme
number 'AV2' with 0.0.2 .
You should select the satelite channels to be
received by the satellite receiver directly on the
receiver itself.
Sorting TV channels automatically
(Follow TV)
When the automatic channel search function is
activated, the TV channels are saved in a specific
order. This may vary from the order of TV chan-
nels on the TV.
This function changes the order of TV channels
saved in the video recorder to match that of the
TV.
Make sure that the video recorder and the TV
are connected by a scart cable.
1.
1.
Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.
Press
MENU
3.
3.
Select 'TUNER SET UP' with
confirm with
4.
4.
Select 'FOLLOW TV' with
.
B 1
confirm with
SELECT K L CHOOSE B
END=EXIT
5.
5.
'P:01' will appear in the video recorder dis-
play.
6.
6.
Select programme number '1' on the TV.
I cannot switch my TV set to programme
number '1'
* If you have connected additional devices to
socket AV2(DECODER), please disconnect
these devices. Because of other connected
devices, the TV set could switch to the pro-
gramme number of the scart socket.
7.
7.
Confirm with
remote control. The video recorder compares
the TV channels on the TV and the video
recorder.
If the video recorder finds the same TV chan-
nel as on the TV, then it stores it at 'P01'.
5
. The main menu will appear.
K B
.
B 1
K B
.
B 1
AUTO TUNING
MANUAL TUNING
FOLLOW TV
MOVE
on the video recorder
B 1
and
L C
and
L C
EN
Hide quick links:
Advertisement
Table of Contents
