Table of Contents
Advertisement
You can search for space on the tape (at least 1 minute of blank tape) for a new recording, for
example, after an existing recording on the tape.
1
0:00:
00
2
Using SMART * , you can display and set many stored picture settings for playback.
1
2
3
Press INDEX E . Then press STOP h . This will, for example,
appear in the display:
As soon as the video recorder finds the corresponding tape position,
it automatically switches to pause.
a
b The video recorder was unable to find any blank space on the tape
inserted.
: Natural picture (standard setting)
: Emphasises details (quick movements, sports)
: Suppression of interference (when using rental cassettes)
: Increase in sharpness (e.g. for animated films)
During playback, press SMART * . This will show the current
picture setting.
SMART * button
Press
the
corresponding picture setting.
If the SMART * button is not been pressed after a few seconds,
the selected picture setting will be saved.
These picture settings will not change until you eject the cassette.
several
times
to
select
the
Playback
Advertisement
Table of Contents
