6.4 SENDING AN INDIVIDUAL CALL
This feature allows the user to contact another user using DSC and to
automatically switch the receiving DSC radio to a desired working channel.
This feature is similar to calling a vessel on CH16 and requesting to go to a
weather channel. To send an individual call, see section 7.4 INDIVIDUAL
DIRECTORY SETUP. The individual call function allows you to transmit a
DSC signal to a specific party only, prompting communication on a voice
channel.
HI USA
2. Press the CALL/SET key.
The DSC CALLING menu will appear.
>INDIVIDUAL
ALL SHIP
STANDBY
CALL WAIT
>TOM
MIKE
BOB
DICK
TOM
MIKE
>BOB
DICK
6. Press the CALL/SET key to transmit the individual DSC signal.
INDIVIDUAL
BOB
WAITING
NO REPLY
BOB
>SEND
EXIT
HI USA
page 23
1. Select the traffic channel for voice communica-
tion.
A
3. Turn the Channel Selector knob to select
INDIVIDUAL.
(To cancel, select EXIT with the Channel Selector
A
knob or press the 16/9 key.)
4. Press the CALL/SET key.
The transceiver will beep, and the individual
A
directory will appear.
5. Turn the Channel Selector knob to select the
individual you want to contact.
A
7. After INDIVIDUAL CALL is transmitted, the
transceiver will wait 8 seconds for the
acknowledgment. If the reply signal is not
A
received, the transceiver will transmit again.
8. After the second INDIVIDUAL CALL is
transmitted, if the reply signal is not received,
the dot matrix area of the LCD will display
A
">SEND" to prompt the user to send the call
again or exit the mode.
9. When an individual call acknowledgment "able
to comply" is received, the established channel
A
is automatically selected and an alarm sounds.
Owner's Manual
GX2350S