Sending An All Ships Call - Standard Horizon Intrepid LE GX1265S Owner's Manual

UNATTENED
BOB
>SEND
EXIT
11. To cancel, select EXIT using the DOWN key and press the CALL/
SET key.
This procedure can be also canceled as follows;
Press the CALL/SET key or 16/9 key.

6.4 SENDING AN ALL SHIPS CALL

The All Ships Call function allows contact to be established with other
vessel stations without having their ID in the individual calling directory.
Also, priority for the call can be designated as Urgency, Safety or Routine.
HI USA
>INDIVIDUAL
ALL SHIP
STANDBY
CALL WAIT
INDIVIDUAL
>ALL SHIP
STANDBY
CALL WAIT
>URGENCY
SAFETY
ROUTINE
EXIT
>URGENCY
SAFETY
ROUTINE
EXIT
TX HI USA
TX HI USA
GX1265S
10. When an individual call acknowledgment with
"unable to comply" is received, the established
A channel is automatically selected.
1. Perform this step only for a Routine call.
S e l e c t t h e t r a f f i c c h a n n e l ( f o r v o i c e
A
communication).
2. Press the CALL/SET key. The DSC CALLING
menu will appear.
A
3. Press the UP or DOWN key to select ALL SHIP.
A
4. Press the CALL/SET key.
To cancel this, press the UP or DOWN key to
A
select EXIT.
5. Press the UP or DOWN key to select the nature
of call (URGENCY, SAFETY or ROUTINE).
A
6. Press the CALL/SET key to transmit the all
ships DSC signal.
A
7. After Urgency or Safety All ships Call is
transmitted the transceiver will switch to
Channel 16. The user should wait a few
minutes before transmitting the ALL Ships Call
information. For a Routine call the transceiver
will switch to the channel (example channel 21).
Owner's Manual page 20