Sending An Individual Call - Standard Horizon Intrepid LE GX1265S Owner's Manual

6.3 SENDING AN INDIVIDUAL CALL

To send an individual call, see section 7.4 INDIVIDUAL DIRECTORY
SETUP. The individual call function allows you to transmit a DSC signal to
a specific party only, prompting communication on a voice channel.
HI USA
2. Press the CALL/SET key.
The DSC CALLING menu will appear.
>INDIVIDUAL
ALL SHIP
STANDBY
CALL WAIT
>TOM
MIKE
BOB
DICK
TOM
MIKE
>BOB
DICK
6. Press the CALL/SET key to transmit the individual DSC signal.
INDIVIDUAL
BOB
WAITING
NO REPLY
BOB
>SEND
EXIT
HI USA
page 19
1. Select the traffic channel for voice communica-
tion.
A
3. Press the UP or DOWN key to select INDIVIDUAL.
(To cancel, select EXIT with the UP or DOWN key
or press the 16/9 key.)
A
4. Press the CALL/SET key.
The transceiver will beep, and the individual
directory will appear.
A
5. Press the UP or DOWN key to select the
individual you want to contact.
A
7. After INDIVIDUAL CALL is transmitted, the
transceiver will wait 8 seconds for the
A
acknowledgment. If the reply signal is not
received, then the transceiver will transmit again.
8. After the second INDIVIDUAL CALL is
transmitted, if the reply signal is not received,
A
the dot matrix area of the LCD will display
">SEND" to prompt the user to send the call
again or exit the mode.
9. When an individual call acknowledgment "able
to comply" is received, the established channel
A
is automatically selected and an alarm sounds.
Owner's Manual GX1265S