Maintenance; Daily; Beginning Of Day - Raytheon SC125VNV Installation & Maintenance

Routine maintenance maximizes operating
efficiency and minimizes downtime. The
maintenance procedures described below will
prolong the life of the machine and help
prevent accidents.
WARNING
Be careful when handling sheet-metal parts.
Sharp edges can cause personal injury.
Wear safety glasses and gloves, use the
proper tools, and provide adequate lighting.
CAUTION
Replace all panels that are removed to
perform service and maintenance
procedures. Do not operate the machine
with missing guards or with broken or
missing parts. Do not bypass any
safety devices.
Daily, weekly, monthly, and quarterly
checklists are provided at the end of this
section. Laminate the checklists to preserve
them for repeated copying. Operators and
technicians are encouraged to add checks
specific to their washer-extractor's particular
application. Where possible, space is provided
on the checklists for this purpose.
The following maintenance procedures
must be performed regularly at the
required intervals.
F232097R1
Section 3

Maintenance

Daily

1. Inspect water inlet valve hose connections
2. Inspect steam hose connections for leaks
3. Verify that insulation is intact on all
SW035
4. Check door interlock before starting
SW019
3–1

Beginning of Day

on the back of the washer-extractor
for leaks.
(where applicable).
external wires and that all connections are
secure. If bare wire is evident, call a
service technician.
operation:
a. Attempt to start the washer with the
door open. The washer should not start
with the door open.
b. Close the door without locking
it and attempt to start the washer.
The washer should not start with the
door unlocked.
c. Close and lock the door and start a
cycle. Attempt to open the door while
the cycle is in progress. The door
should not open.
If the door lock and interlock are
not functioning properly, call a
service technician.