Setting The Electronic Eraser; Replacing The Eraser Cloth - Panasonic Panaboard KX-BP800U Operating Instructions Manual

Setting the Electronic Eraser

Remove the eraser cover, insert the
batteries as shown in the figure to the right,
and re-attach the eraser cover.
• Always use "LR03" (alkaline) batteries and
be sure that their polarity is properly
oriented.
• Do not mix old and new, different type
batteries when replacing batteries.
Brasil
Ap s o uso as pilhas / baterias contidas neste
produto poder o ser dispostas em lixo dom stico.

Replacing the eraser cloth

1
Remove the eraser cloth by pushing through
the hole in the Electronic Eraser.
2
Attach a new eraser cloth by pressing
around the edge.
Note
• Press down firmly with the eraser cloth of the Electronic Eraser on the screen film until you hear a buzzing
sound.
Before Using the Interactive Function
Eraser
Cover
Electronic
Eraser
Press
Hole
Eraser Cloth
New Eraser Cloth
25