The Interactive Panaboard Software; Switching The Mode - Panasonic Panaboard KX-BP800U Operating Instructions Manual

Using the Interactive Panaboard Software
Pop-up menu configuration of the Interactive Panaboard Software
Right-click the
Following operations are possible in the pop-up menu.
Select Mode... :
Calibrate :
Tool Draw :
On-Screen Keyboard :
View Window :
Open / Close
Whiteboard window :
Settings COM Port... :
Adjustment... : Adjust the position of the Electronic Pen or the Electronic Eraser to
Options... :
Help Topics... :
About... :
Exit :

Switching the mode

You can freely switch the Projector mode and the Whiteboard mode
while the Interactive Panaboard Software is running.
1
Right-click the icon
in the pop-up menu. In addition, you can double-click the icon
in the Taskbar.
• The Select Mode dialog box will appear.
2
Click either the [Projector] button or the [Whiteboard] button, and then click the [OK]
button.
• When switching to the Projector mode, the calibration screen will not be displayed
automatically after calibration ended correctly once. Please calibrate if necessary.
• When switching to the Whiteboard mode, the Whiteboard window will be displayed.
30
in the Taskbar to get the pop-up menu.
Allow you to switch between modes (Projector mode / Whiteboard mode).
Execute the calibration.
Display the Desktop Drawing Tool.
Display the On-Screen Keyboard.
Display the View Window.
Switch the Whiteboard window
open / close.
Set the communication port.
improve the shifted position.
Set the option of the Interactive Panaboard Software.
Display the help of the Interactive Panaboard Software.
Display the Interactive Panaboard Software version information.
Exit the Interactive Panaboard Software.
in the Taskbar and click [Select Mode...]
(Projector mode only)
(Projector mode only)
(Projector mode only)
(Projector mode only)
(Whiteboard mode only)
Page 35
Page 39
Page 47
Page 50
Page 53