Meanings of various displays
The following table describes the meaning of each of the symbols which may flash in the Multi-Copy / Error
indicator.
Indication
Out of paper.
The printer door is not closed securely.
The thermal transfer film is slack or has
run out.
Paper jam.
The screen will not move.
The room temperature is 10°C or lower.
The fluorescent lamp is dead.
• If other indications such as "
Cause
" appear, call your dealer.
Remedy
Load copy paper.
Close the printer door securely.
Remove the slack from the thermal
transfer film or replace.
Open the printer door and remove the
jammed paper.
Remove any chart paper attached to the
screen and slowly move the screen by hand.
Increase the room temperature.
Call your dealer for service.
Troubleshooting
See
Page
16
15
15
20
21
79